Skip to content Skip to sidebar Skip to footer

How to Flash using QFILE

How to Flash using QFILE ?

  • Download and install (Qualcomm) USB Drivers.
  • Then download and install QFil Flasher.
  • Download the flash file for firmware and extract it.
  • Open Qfil flasher, then specify the prog_emmc_firehose_xxxxxx.mbn file in Programmer Path.
  • Now in Load XML specify rawprogram0.xml and patch0.xml file.
  • Now click select port and power OFF your phone. Hold Volume + and Volume – and then insert the USB data cable.
  • The selected port will show like HS-USB QD Loader 9008.
  • Now click on Download Button and the flashing process will start.
  • Once flashing finished, you will see the Finished Download.


Disclaimer: gsmxcell.net is not responsible for any damage caused to your phone. Please backup you phone firmware and important user data before flashing. Your all user data will be erased during flashing procedure. This file is 100% tested by me. Don’t try to flash this file on other phones.